Unigraphics nx mold wizard pdf

As well, on our website you may read manuals and other artistic book s online, either load them. We wish draw attention that our website does not store the eBook itself, but we give link to site wherever you can downloading or reading online.

So that if want to download pdf Ug mold wizard guide in english, then you have come on to the faithful site. A template assembly Units The path to the project part files The project name. Material and shrinkage factor. When you initialize a project, the solid product body becomes the parent of a series of associatively linked bodies. You can replace the product model file with a revised file and update the mold assembly with minimal loss.

Family molds You can use the Initialize Project command to add another product to an open tooling assembly. You can add as many products as you require in one injection mold.

On the Mold Wizard toolbar, click Initialize Project. In the Open Part File dialog box, navigate to and select the product model for which you want to define a mold assembly. If you are prompted to select the product body, select one of the two or more bodies in the product model part file.

Optional In the Path box, type a path, or, click Browse. Optional In the Name box, type a name for the project. Optional From the Material list, select a defined material and shrinkage factor.

Optional From the Configuration list, select a template assembly structure. Optional In the Shrinkage box, type the shrinkage factor. Optional From the Configuration list, select a template assembly for the project. Optional In the Attributes group, assign attributes to the top level assembly part. Optional In the Initialize Project dialog box, in the Settings group, select the project units. Optional In the Settings group, select the Rename Components check box to open the Part Name Management dialog box after you finish specifying project parameters.

Tip: You can use the Part Name Management dialog box to verify or change the default file names of the assembly component parts. Click OK. Warning: After the template assembly is renamed, the parts are not saved to disk. You can close the parts without saving them if you want to change the settings. Add a product to an assembly When you load additional product models to a tooling assembly, the units, project path, and project name remain the same and the Initialize Project dialog box is not displayed.

Open an existing tooling assembly. On the Mold Wizard tool bar, click Initialize Project. In the Open Part File dialog box, navigate to and select the product model that you want to add to the mold assembly.

Repeat this process until all of the family product models have been added. Caution: To create additional instances of a product that is already in the mold assembly, use the Cavity Layout command. Open an existing project 1. Start the Mold Wizard application. Choose FileOpen. Tip: If you find it more convenient, you can also click Initialize Project at this step.

Selects a product body if there are multiple solid bodies in the original product file. Select Object. Accept the path to the folder from which you selected the product model or type a different path. Type a new path. Browse to a path. Tip: You can specify an existing folder or create a new one. Note: The project path box and browse button are not available in the Teamcenter environment; the mold project is referenced under the plastic product.

Sets the project name. By the default naming rule, the project name is included as a prefix to the file name of each file in the mold project. Tip: The default project name is the name of the product model. Try to use short project names, less than ten characters. Note: The customer defaults include a setting to control the maximum number of characters allowed in the project name.

A project name with more characters than the specified limit will be truncated. Sets the shrinkage factor from a database of materials. Note: Material The Material list is used only to set the shrinkage factor. The name of the material that you select is not stored. You can customize the material database spreadsheet. Sets the shrinkage. Shrinkage Tip: You can override a material database value or enter any shrinkage factor not present in the database.

Lets you select a template assembly. Tip: Configuration Assembly template files define the assembly structure of a mold design project.

The initialization process automatically duplicates the assembly structure defined in the template assembly. Attributes list Settings Specifies the units of measure for the tool assembly files. Tip: You should be aware that some manufacturers provide only millimeter standard parts, others provide only inch standard parts, and several provide both.

Project Units In the customer defaults, you can change the default project units to be always: y y y. You can also allow mixed units for standard parts. Opens the material database spreadsheet Edit Material.

Data Base Opens the template assembly register spreadsheet Opens the custom attributes spreadsheet Edit Customized If you specify any existing part name and a numeric suffix wild card character in the name rule, the the numeric suffix is incremented until a unique name is found.

If you specify an existing project path and name with no numeric suffix wild card, a dialog box is displayed with the following options: y y y. Note: Click the links for detailed descriptions. You can create you own configurations. See Customize template configurations. Use the recommended and default template. Use the parting-set structure, to be able to change the mold coordinate system after you create the parting.

Use a sketch-based, extruded workpiece. Garrett Koch Garrett L. Mold and tool makers, machinists, programmers, or any user involved in designing tooling that fabricates parts and products using the multitude of molding ug nx mold wizard tutorial can benefit from selected portions of this functionality or the entire integration of tasks assuming the product part is modeled:.

This 3-part article discusses a few of the commands within NX10 Mold Wizard functionality that are very impressive and indicate the level of sophistication of the cross-applicational software product. It also provides a rough overview of ug nx mold wizard tutorial wizars of the steps in the process of building the parts and subassemblies of the complete mold assembly.

You can edit any of the expressions and attributes listed in the Details group, make it smart, base it on a spreadsheet, etc. Save early, save often. One thing should be emphasized and strictly adhered to when working ug nx mold wizard tutorial Mold Wizard: Now you can select the various vendor folders above and peruse the vast list of mold configurations. Also, as an molc variable must be created: Most of these procedures are done without the user having to change Ug nx mold wizard tutorial or Displayed part — Mold Wizard does that automatically.

But, if we look at the bigger picture, the entire side of the part ug nx mold wizard tutorial to the bottom will be formed by the cavity side. Yse user defined box workpieces with sizes based on clearance and automatic rounding, or on dimensions from a reference point.

Part name Identifying attribute pontains product-specific components for a single instance of a product model. The model should be a original product valid solid body. The initially broken link is re-linked to the product body during initialization. Part name Identifying attribute pontains a linked copy of the original product body.

Ysed to make corrections such as tapers and edge blends. Does not clone. Dor more information about the template structure, see Project initialization Initialize Project related topics. Parts lists. Background color. You can take the value from another part by using the syntax shown in the example.

You can reference another part by its attribute as shown in the table in Initialize Project related topics. Open navigation menu. Close suggestions Search Search. User Settings. Skip carousel. Carousel Previous. Carousel Next. What is Scribd? Explore Ebooks.

Bestsellers Editors' Picks All Ebooks. Explore Audiobooks. Bestsellers Editors' Picks All audiobooks. Explore Magazines. Editors' Picks All magazines. Explore Podcasts All podcasts. Difficulty Beginner Intermediate Advanced. Explore Documents. Unigraphics Nx7. Uploaded by quangminh Did you find this document useful? Is this content inappropriate? Report this Document. Flag for inappropriate content. Download now. Save Save Unigraphics Nx7. Related titles. Carousel Previous Carousel Next.

Jump to Page. Search inside document. Mold hardware By default, all models are associative to the original product model. This file contains the conversion macros necessary to convert file formats.

Tip: You must set Microsoft Excel macro security to a level that permit the macros to run. Dor additional details, see Xess-Excel ponversion. Dor more information, see Getting Defaults and Preferences. The Mold.